Enquire Now

Diamond Wire Sawing

Specialist Concrete Sawing Services

With over 35 years' experience in the construction industry, Corecut is the UK's leading Diamond Wire Sawing specialist. We have worked on a huge variety of projects throughout the UK and can provide solutions to even the most complex of requirements.

Get a quote for your project

Why Choose Corecut

  • Over 35 years' experience in the construction industry
  • Europe-wide, fully mobile workforce
  • All operators are fully trained and CSCS accredited
  • Use of the latest Wire Sawing technology

What is Wire Sawing?

Wire Sawing was traditionally used for many years in the quarrying trade, however the technique has been perfected for use in the Concrete Cutting industry.

Using this technique, a diamond-infused wire is fed through a sequence of guide pulleys and passed through or around the section of concrete that needs cutting and then formed into a loop. The wire loop is then pulled continuously through the concrete section until the cut is accomplished.

When to use Wire Sawing

Diamond Wire Sawing is the perfect technique when confronted with the issue of removing substantial areas of heavily reinforced concrete in complex situations where there is limited access such as a bridge deck or the removal of columns and beams, where depth and speed of cut are imperative.

Diamond Wire Sawing that uses High Cycle Electric or Hydraulic Equipment is by far the quickest and most flexible method of cutting concrete that has been heavily reinforced. The Wire Saw is able to cut even the thickest sections of all construction material. Corecut's team of Wire Sawing experts can achieve cutting rates in excess of 1sqm per hour and can also cut circular openings up to 2500mm diameter producing clean, straight and smooth cut surfaces with no damage to the remaining structure. 

As well as Wire Sawing, Corecut also specialises in other concrete cutting techniques including Floor Sawing and Wall Sawing.

Key features of Wire Sawing

  • Non-percussive, fumeless and quiet
  • Smooth cut face
  • Unlimited cutting depth
  • Horizontal, vertical and angled cutting of circular openings up to 2500mm diameter
  • Flexible and quick
  • Plunge cutting facility which allows blind and rebated openings to be formed
  • Remote controlled operation for increased safety

With 35 years' experience Corecut have successfully employed Diamond Wire Sawing to complete some of the largest and most complex construction projects in the UK. Our fully equipped and fully mobile workforce cover both the UK and Europe meaning we can respond to your Wire Sawing needs at lightning speed. 

Read a selection of testimonials from some of our satisfied clients.

To speak to one of our Diamond Wire Sawing team please call
0845 5199 330 or request a free quote

Free Quote

Call NOW on 0845 519 9330 for a free quote. Or complete below.

Download Our Latest Brochure

Corecut Brochure

Call 0845 519 9330 for an Instant Quote