Wire Sawing Chesterfield
Corecut, with more than 45 years of construction industry experience, is the UK’s top Diamond Wire Sawing specialist. Serving Chesterfield, we have worked on a diverse array of projects across the UK, offering solutions for the most challenging requirement.
What is Wire Sawing
Traditionally used in the quarrying industry, Wire Sawing has been refined for the Concrete Cutting sector. This method uses a diamond-infused wire, which is fed through a sequence of guide pulleys and around or through the concrete section needing cutting, forming a loop. The loop is then continuously pulled through the concrete until the cut is achieved.
In Chesterfield, Corecut specialises in Wire Sawing as well as other concrete cutting techniques, such as Floor Sawing and Wall Sawing.
When to Use Wire Sawing?
Diamond Wire Sawing is perfect for removing large areas of heavily reinforced concrete in challenging situations with limited access, such as bridge decks or when removing columns and beams, where both depth and cutting speed are essential.
In Chesterfield, Diamond Wire Sawing using High Cycle Electric or Hydraulic Equipment stands out as the quickest and most adaptable method for cutting heavily reinforced concrete. The Wire Saw can cut through the thickest sections of all construction materials. Corecut’s Wire Sawing specialists can achieve cutting rates over 2 sqm per hour and create circular openings up to 2500mm in diameter, ensuring clean, straight, and smooth surfaces without harming the remaining structure.
Chesterfield
Corecut is proud to offer professional Wire Sawing services in Chesterfield, catering to a wide range of construction and demolition needs. Our extensive experience and commitment to quality make us the preferred choice for Wire Sawing in Chesterfield. We understand the unique challenges and requirements of projects in Chesterfield, and our team is equipped to handle them with ease. From initial consultation to project completion, we ensure that every aspect of our Wire Sawing is executed flawlessly.
Our track record of successful projects in Chesterfield speaks for itself, and our team is composed of highly trained and experienced professionals dedicated to delivering excellent results. We use efficient methods and advanced technology to complete projects on time and within budget, providing comprehensive solutions whether for small residential projects or large commercial endeavours. Reach out to Corecut today to discuss your Wire Sawing needs in Chesterfield and find out how we can assist you with our top-quality services.
Key features of Wire Sawing
-
NON-PERCUSSIVE, FUMELESS AND QUIET
-
SMOOTH CUT FACE
-
UNLIMITED CUTTING DEPTH
-
HORIZONTAL, VERTICAL AND ANGLED CUTTING OF CIRCULAR OPENINGS UP TO 2500MM DIAMETER
-
FLEXIBLE AND QUICK
-
PLUNGE CUTTING FACILITY WHICH ALLOWS BLIND AND REBATED OPENINGS TO BE FORMED
-
REMOTE CONTROLLED OPERATION FOR INCREASED SAFETY
-
CUTTING RATES IN EXCESS OF 2SQM PER HOUR
What is Wire Sawing?
Wire Sawing was traditionally used for many years in the quarrying trade, however the technique has been perfected for use in the Concrete Cutting industry.
Using this technique, a diamond-infused wire is fed through a sequence of guide pulleys and passed through or around the section of concrete that needs cutting and then formed into a loop. The wire loop is then pulled continuously through the concrete section until the cut is accomplished.
As well as Wire Sawing, Corecut also specialises in other concrete cutting techniques including Floor Sawing and Wall Sawing.
When to use Wire Sawing?
Diamond Wire Sawing is the perfect technique when confronted with the issue of removing substantial areas of heavily reinforced concrete in complex situations where there is limited access such as a bridge deck or the removal of columns and beams, where depth and speed of cut are imperative.
Diamond Wire Sawing that uses High Cycle Electric or Hydraulic Equipment is by far the quickest and most flexible method of cutting concrete that has been heavily reinforced. The Wire Saw is able to cut even the thickest sections of all construction material. Corecut’s team of Wire Sawing experts can achieve cutting rates in excess of 2sqm per hour and can also cut circular openings up to 2500mm diameter producing clean, straight and smooth cut surfaces with no damage to the remaining structure.
Lerwick Power Station
Corecut were engaged in a contract for the provision of labour, management, and equipment to carefully remove a large concrete, diesel engine block in a very sensitive environment at Lerwick Power Station
Read More