Enquire Now

Grouting and Structural Repairs

Corecut offer a wide range of Grouting services that range from Machine Base Grouting to the infilling of cavities behind walls tunnel linings, from the lining of tunnel to the bulk infilling of disused sewers. Corecut’s expert Grouting team have even conducted repairs to hydroelectric power stations and reservoirs.

We have successfully completed numerous contracts which have necessitated the exact control of the injection pressures and the use of a range of different grout application methods including high capacity self-contained diesel pumps to compressed air or electric.

At Corecut we have vast experience of using crack injection techniques to seal fine cracks in a range of materials including concrete and masonry. The crack injection techniques help bind structures, preventing water and dampness from entering structures. 

Key Features

  • All our equipment is self-contained and fully mobile
  • Equipment is powered by diesel, air or electric
  • Ability to apply a range of materials to suit all applications
  • Fully trained CSCS accredited operators covering the UK and Europe

Anchor Installation

As an approved Cintec Anchor installer we have successfully completed extensive structural repairs on a range of projects including historic buildings and monuments, bridges, tunnels, and harbours, gaining an unparalleled reputation for solving complex challenges of structural preservation.

We also have extensive experience in the supply and installation of conventional mechanical and resin fixings for applications from the fixing of structural steel work to the installation of fall arrest anchors. 

Pressure Pointing

Using a pre-blended mortar and a specially designed pumping system, Corecut’s engineers have repeatedly proven their expertise in the field of pressure pointing from bridges to tunnels, both in masonry and brickwork. Contracts completed have included the sea walls at Rothesay and Dunoon and the harbour wall at Dunbar. All of these projects were carried out in difficult tidal conditions, using an accelerator to ensure complete set of mortar. Joints were first cleaned out with water jets operating at pressures of up to 6000 psi, followed by the new mortar being injected to depths of 300mm into the stonework fabric. The pointing was then struck off to give a finish that blended with the original mortar.

Free Quote

Call NOW on 0845 519 9330 for a free quote. Or complete below.

   * = required

Download Our Latest Brochure

Corecut Brochure

Call 0845 519 9330 for an Instant Quote